Sierra Monitor Corporation ISE30 Manual do Utilizador descarregar pdf (Página 14)

Install using the special bracket (Article No.ZS

B) or the panel mount adapter (Article No.ZS

available as options.

Caution : Tighten the pipe port at a clamping torque of 7 to 9N⋅m.

Fasten the bracket mounting screws at a clamping torque of 0.5 to 0.7N⋅m.

Mounting by Bracket

Mount the bracket on the main unit using the two

mounting screws M3 × 5L and install on the facility

using hexagon socket head cap screws.

Mounting procedure with the panel mount adapter

1. Mount the panel mount adapter (1) to the switch display

side.

Mount the panel mount adapter so that the adapter hook

engage with the groove of the switch.

2. Insert the switch from the front of the panel

for the switch mount hole.

3. Mount the panel mount adapter (2) to the switch

from the back of the panel.

Press the panel mount adapter (2) with a driver

to the panel for secure mount.

Panel mount adapter (2) can be mounted even

when rotated 90°.

4. Play can be reduced by using attached tapping screw.

-13-

PS##-OMF0010-C

Installation

1 2 ... 9 10 11 12 13 14 15 16 17 18 19 ... 23 24

Sem comentários

Sierra Monitor Corporation ISE30 Manual do Utilizador Página 14